Y401-0044-L 4AI + 4AO LoRa Wireless Analog I/O Module

Product Description

Y401-0044-L is a 4AI + 4AO LoRa wireless analog I/O module for transferring four analog signal channels between separated locations. A typical application uses two matched units, with corresponding analog inputs reproduced at the outputs of the paired unit in the opposite location.

• View the official Y401-0044-L specifications

Best Fit

• Wireless extension of multi-channel analog process signals.
• Remote pressure, level, flow and temperature monitoring.
• Analog signal transfer between field instruments and control panels.

Signal Configuration

Choose the hardware signal type before ordering: 4-20 mA or 0-10 V. These are different electrical configurations, not a software setting. Do not connect a current signal to the voltage version or a voltage signal to the current version. Mixed signal types across channels are not specified.

Key Specifications

• 4 analog inputs and 4 analog outputs per unit.
• LoRa point-to-point communication; up to 5 km in standard open-area conditions.
• A 10 km version may be available for selected projects by quotation; it is not a standard selectable variant on this page.
• 4-20 mA version: DC 9-36 V supply, approximately 2 W, input/output error within +/-0.3 mA, output load up to 500 ohms.
• 0-10 V version: DC 12-36 V supply, approximately 1.5 W, input/output accuracy within +/-0.1 V.
• 5.08 mm pluggable terminals with Work, Link, AI and AO indicators.
• Operating temperature: -20 to +75 C.

Before Ordering

Confirm the signal type, field instrument output, receiving equipment input, power supply and installation distance. Each unit requires local DC power. Enclosure dimensions and final environmental details should be confirmed against the ordered configuration.

This product is normally used as two matched units. Please confirm whether your quotation requires one module or a complete matched pair.

Request a Y401-0044-L configuration check